A resort in Bali ordered six of these last year for their cliffside villas
We shipped them in January, and by March the resort was fully booked through the summer season. Guests kept asking if they could buy one for themselves. That's when we knew the M42 hit a sweet spot. It's big enough to feel like a real home, not a cramped hotel room, but small enough that the numbers still work for developers.
Why the M42 exists
We built the M42 for resort operators who need more than a tiny capsule but can't justify the cost and timeline of traditional construction. The 42-square-meter footprint fits a bedroom area, separate bathroom, small kitchenette, and living space without feeling cramped. It targets mid-range glamping sites and boutique hotels that want to offer something unique without blowing their budget on custom architecture.
Most modular pods top out around 25-30 square meters. Those work for solo travelers or couples, but families and longer-stay guests need more room. We designed the M42 to bridge that gap between compact capsules and full-sized prefabricated cabins.
Specifications
| Model | Area | Dimensions |
|---|---|---|
| M42 | 42 sqm | 12m × 3.5m × 3.2m |
Use cases
A glamping resort in Koh Samui used three M42 units to create a "family village" section. Each unit houses a family of four with separate sleeping and living zones. Occupancy runs 78% year-round at $180 per night, which covers the unit cost in about 14 months.
An eco-lodge in New Zealand installed two M42 pods as standalone premium suites. The steel frame and insulated panels handle the coastal winds and temperature swings without issue. One unit has been operating for 22 months with no structural repairs needed.
A startup in Austin, Texas bought a single M42 for a backyard office that doubles as a guest suite. The local permitting process took 3 weeks since the structure is technically a movable unit rather than permanent construction. Total project cost came in at $41,000 including foundation work and utility connections.
How it compares to traditional options
Building a 42-square-meter cabin from scratch typically costs $55,000-$75,000 USD in materials and labor, plus 4-7 months of construction time. The M42 lands at $32,000-$38,000 and arrives ready to install. That gap widens when you factor in architectural fees, permit delays, and weather-related setbacks.
Prefabricated cabins in this size range often require crane rental and larger crews for assembly. The M42 ships flat-packed with a steel frame that two people can lift into position. A standard forklift handles the wall panels. You can put one up with a crew of three in a single day.
Traditional construction locks you into a permanent footprint. If your resort layout changes, you're stuck. The M42 can be disassembled and relocated. We've had clients move units between properties or resell them when their business model shifted.
What to know before ordering
Site prep matters more than most people expect. You need a level foundation, either concrete piers or a compacted gravel pad, before the unit arrives. Budget $1,500-$4,000 for foundation work depending on your terrain.
Permitting varies by location. In most jurisdictions, the M42 classifies as a temporary or movable structure, which simplifies approvals. But we've seen rural areas require full building permits while some urban zones don't allow any accessory dwelling units. Check with your local planning office before ordering.
The standard M42 ships with insulation rated for -15°C to 45°C. If you're installing in extreme climates, ask about our cold-weather or desert packages with upgraded insulation and HVAC options.
Related models
If the M42 feels larger than you need, take a look at our M30 capsule (24.5sqm) for couples and solo travelers. For something in between, the M50 pod (30sqm) offers a middle ground. And if you want even more space, our M70 capsule (42sqm) provides the same footprint with a different interior layout optimized for luxury suites.