A hotel group buying modular units is not buying buildings. It is buying rooms that have to meet a brand standard, integrate with a property management system, survive a brand audit, and be cleanable by a housekeeping team that has never seen the product before.
That is a different specification from a glamping pod, and it is the one this unit is configured for.
Where customisation actually matters to a hotel
- Bed configuration. King, twin or accessible. A twin room needs two 1.0 m beds with a 600 mm gap and two bedside positions, which changes the electrical layout, the lighting circuit and the headboard wall.
- Accessibility. A step-free threshold, a 900 mm door, a 1,500 mm turning circle, grab rails and a roll-in shower. All of it is straightforward at the factory and close to impossible to retrofit into a finished capsule.
- Brand standards. Bed height, headboard height, mirror position, lighting temperature, artwork fixing points, minibar position. Send the standard document and it is built to it.
- FF&E. Loose furniture, curtains, soft furnishings, safes, hairdryers and kettles. Either supplied by us to a schedule or supplied by your FF&E contractor into a prepared unit — both work, but decide before production.
- Systems. Key-card or app entry, room management integration, energy management, and a lock that your PMS recognises. The unit is pre-wired for the lock and the controller; the integration is configured on site.
The housekeeping test
The most useful specification review a hotel can do is to walk a housekeeper through the plan. Three things come out of it almost every time:
- Floor finish that survives a mop and a disinfectant, not just a photograph.
- A shower that can be cleaned in one pass — solid-surface walls and a single-piece tray, not tile and grout.
- Storage for linen and consumables inside the unit, or a defined trolley route that does not cross the guest path.
None of these are visible in a rendering and all of them show up in the labour cost per room-night.
Phasing a hotel extension
Because the units are built in a factory and assembled in two to three days, a hotel can add rooms in phases without closing. Phase one of six units opens in the current season; phase two follows when occupancy justifies it. The drawings, the spares and the housekeeping routine are already established, so the second phase is cheaper than the first.
This is the argument in adding premium suites without disrupting guests and more beds without the construction headache, both written for operators rather than for buyers.
Structure and delivery
Aviation-grade aluminium alloy frame with hot-dip galvanised steel reinforcement, insulated composite panels, Low-E hollow glazing; wind level 12, seismic intensity 9, 50-year design life. Flat-packed, standard gate access, two to three days to assemble. No piling — a levelled pad or screw piles, which is also what allows the units to be re-sited if the master plan changes.
Customisation is quoted at drawing stage. Send the brand standard, the room mix and the destination, and we will return a specification and a layout for each room type. Standard production runs about 15 days after drawing approval, with one month at peak; FOB, CIF, CFR or EXW from Qingdao; CE and ISO documentation included.
Our Factory & Business Profile
✔
Type: Manufacturer / Factory & Trading Company
✔
Address: About 60 meters south of the intersection of
Xiaxi Road and Yuqian Road, Linqu County, Weifang City
✔
Factory Area: 3,400 ㎡
✔
Staff: 32
✔
Registered Capital: 5,000,000 RMB
✔
Payment Terms: T/T, LC, D/P, PayPal, Western Union, Small
Payment
✔
Trade Terms: FOB, CIF, CFR, EXW
✔
Lead Time: One month for both peak & off seasons
✔
Nearest Port: Qingdao Port
✔
MOQ: 1 Unit
✔
Supply Chain Partners: 60
Production Capacity & Technical Expertise
✔
Main Products: Space Capsule House, Apple Pod
House
✔
Production Lines: 3
✔
Production Machines: Cutting Machine, Assembly Line,
Bending Machine
✔
Quality Inspection: 100% Full Inspection (Appearance &
Function)
✔
Inspection Standard: Clear Instructions & Unified
Implementation
✔
Customization: Customized based on samples, designs, full
& flexible customization
✔
R&D Engineer: 1
✔
Raw Material Traceability: Yes
✔
Own Brand: Yes
Industry Experience & Global Business
✔
Founded: 2021
✔
Export Experience: 5 Years
✔
Main Markets: Europe, North America, Southeast Asia,
Middle East, Central Asia
✔
Repeat Customer Rate: 10%~30%
✔
Foreign Trade Staff: 8
✔
Overseas Agent: None