"High quality" is the phrase on every supplier's homepage and the one claim that cannot be checked from a photograph. This page is about what is actually inspectable — the materials, the tolerances and the checks — so that a buyer can ask useful questions.
The materials, named
- Frame: hot-dip galvanised steel, with the coating thickness specified and cut edges coated after fabrication.
- Exterior: aviation-grade aluminium alloy panels, powder coated, with a coating specified for exterior exposure rather than a decorative finish.
- Envelope: insulated composite panels with a defined core density and a defined panel thickness — not "insulated" as an adjective.
- Glazing: Low-E hollow units with a defined cavity and a warm-edge spacer.
- Interior: zero-formaldehyde boards and panels; solid-surface or compact laminate in wet areas.
Each of these can be evidenced on request with a material certificate or a test report. If a supplier cannot name the core density of their wall panel, that is the answer to the quality question.
Tolerances that decide whether a unit feels well made
Quality in a transportable building is mostly about what happens at the joints. The details that separate a good unit from an average one:
- Panel joints aligned within a couple of millimetres over an 11 m elevation, with a consistent shadow gap. A wavy joint line is visible from twenty metres.
- Doors and windows that close with even pressure on the seal all round, checked after transport rather than only at the factory.
- Floor level within tolerance across the whole footprint, because a stiff box on an uneven floor creaks and the doors rack.
- Services that terminate in a labelled distribution board, with a schematic that matches what was built.
The checks that matter
- Water test on the wet core and the glazing line before dispatch.
- Electrical continuity, insulation resistance and RCD trip test, with results recorded.
- Pressure test on the plumbing, held for the specified period.
- HVAC and fresh-air commissioning, with airflow measured rather than assumed.
- Lift test at the defined points, which is also the check that the frame has been assembled correctly.
- Final inspection against the specification schedule, with photographs.
These are documented and travel with the unit. A commissioning checklist that has been filled in is worth more than a certificate of quality, because it says what was tested and what the result was.
What a buyer should verify independently
Ask for the material certificates, the electrical test results and photographs of a unit at the same stage of build as yours. Ask to speak to a customer in your region. And ask what happens if a panel arrives damaged — a supplier with a spares kit and a defined process answers that in a sentence; one without will change the subject.
Structure: aluminium alloy and hot-dip galvanised steel, wind level 12, seismic intensity 9, 50-year design life. Production is standardised, which is what makes the tenth unit as good as the first — the point the reseller and developer guide makes about repeatability. For material comparisons, aluminium panel versus steel capsule shell and interior materials are the relevant reads.
Our Factory & Business Profile
✔
Type: Manufacturer / Factory & Trading Company
✔
Address: About 60 meters south of the intersection of
Xiaxi Road and Yuqian Road, Linqu County, Weifang City
✔
Factory Area: 3,400 ㎡
✔
Staff: 32
✔
Registered Capital: 5,000,000 RMB
✔
Payment Terms: T/T, LC, D/P, PayPal, Western Union, Small
Payment
✔
Trade Terms: FOB, CIF, CFR, EXW
✔
Lead Time: One month for both peak & off seasons
✔
Nearest Port: Qingdao Port
✔
MOQ: 1 Unit
✔
Supply Chain Partners: 60
Production Capacity & Technical Expertise
✔
Main Products: Space Capsule House, Apple Pod
House
✔
Production Lines: 3
✔
Production Machines: Cutting Machine, Assembly Line,
Bending Machine
✔
Quality Inspection: 100% Full Inspection (Appearance &
Function)
✔
Inspection Standard: Clear Instructions & Unified
Implementation
✔
Customization: Customized based on samples, designs, full
& flexible customization
✔
R&D Engineer: 1
✔
Raw Material Traceability: Yes
✔
Own Brand: Yes
Industry Experience & Global Business
✔
Founded: 2021
✔
Export Experience: 5 Years
✔
Main Markets: Europe, North America, Southeast Asia,
Middle East, Central Asia
✔
Repeat Customer Rate: 10%~30%
✔
Foreign Trade Staff: 8
✔
Overseas Agent: None